[用户交互] 关键字设置

萧闫子 · 发表于 2014-1-8 16:36:49

This post extends the polyline-creation jig shown in the previous entry to support the use of keywords both for arc segments and for undo.
A few notes:
I removed the use of a separate vertex list, as it proved to be less necessary than needed
This implementation supports Undo, and the toggling between Line segment and Arc segment entry
Arc segments have a fixed bulge of 1.0, which is actually quite useful if drawing a cloud, but not really useful for much else. Generally the bulge should be adjusted according to the position of the cursor relative to the previous point, which may be something I attempt in a future post
I've also streamlined some of the other parts of code (such as using the basepoint in the jig - which we don't actually need, as we allow the polyline to draw itself)
The code has become quite a bit more complex, and could probably do with some additional performance tuning, but it should allow you to get the idea of what can be done (and one way of approaching it). I should also say that - and this holds true for any of the code samples posted in this blog - it should be thoroughly tested before being integrated into your own application. Hopefully that goes without saying...
Here's the C# code:

using Autodesk.AutoCAD.ApplicationServices;
using Autodesk.AutoCAD.DatabaseServices;
using Autodesk.AutoCAD.EditorInput;
using Autodesk.AutoCAD.Runtime;
using Autodesk.AutoCAD.Geometry;
namespace MyPlineApp
{
public class MyPlineCmds
{
class PlineJig : EntityJig
{
// Use a separate variable for the most recent point...
// Again, not strictly necessary, but easier to reference
Point3d m_tempPoint;
Plane m_plane;
bool m_isArcSeg = false;
bool m_isUndoing = false;
// At this stage, weour arc segments will
// have a fixed bulge of 1.0...
// Later we may update the routine to determine
// the bulge based on the relative location
// of the cursor
const double kBulge = 1.0;
public PlineJig(Matrix3d ucs)
: base(new Polyline())
{
// Create a temporary plane, to help with calcs
Point3d origin = new Point3d(0, 0, 0);
Vector3d normal = new Vector3d(0, 0, 1);
normal = normal.TransformBy(ucs);
m_plane = new Plane(origin, normal);
// Create polyline, set defaults, add dummy vertex
Polyline pline = Entity as Polyline;
pline.SetDatabaseDefaults();
pline.Normal = normal;
AddDummyVertex();
}
protected override SamplerStatus Sampler(JigPrompts prompts)
{
JigPromptPointOptions jigOpts =
new JigPromptPointOptions();
jigOpts.UserInputControls =
(UserInputControls.Accept3dCoordinates |
UserInputControls.NullResponseAccepted |
UserInputControls.NoNegativeResponseAccepted
);
m_isUndoing = false;
Polyline pline = Entity as Polyline;
if (pline.NumberOfVertices == 1)
{
// For the first vertex, just ask for the point
jigOpts.Message =
"\nStart point of polyline: ";
}
else if (pline.NumberOfVertices > 1)
{
// For subsequent vertices, use a base point
if (m_isArcSeg)
{
jigOpts.SetMessageAndKeywords(
"\nSpecify endpoint of arc or [Line/Undo]: ",
"Line Undo"
);
}
else
{
jigOpts.SetMessageAndKeywords( "\nSpecify next point or [Arc/Undo]: ", "Arc Undo" ); }
}
else // should never happen
return SamplerStatus.Cancel;
// Get the point itself
PromptPointResult res =
prompts.AcquirePoint(jigOpts);
if (res.Status == PromptStatus.Keyword)
{
if (res.StringResult == "Arc")
{
m_isArcSeg = true;
}
else if (res.StringResult == "Line")
{
m_isArcSeg = false;
}
else if (res.StringResult == "Undo")
{
m_isUndoing = true;
}
return SamplerStatus.OK;
}
else if (res.Status == PromptStatus.OK)
{
// Check if it has changed or not
// (reduces flicker)
if (m_tempPoint == res.Value)
{
return SamplerStatus.NoChange;
}
else
{
m_tempPoint = res.Value;
return SamplerStatus.OK;
}
}
return SamplerStatus.Cancel;
}
protected override bool Update()
{
// Update the dummy vertex to be our
// 3D point projected onto our plane
Polyline pline = Entity as Polyline;
pline.SetPointAt(
pline.NumberOfVertices - 1,
m_tempPoint.Convert2d(m_plane)
);
// If it's supposed to be an arc segment,
// set the bulge appropriately
if (m_isArcSeg)
{
pline.SetBulgeAt(
pline.NumberOfVertices-1,
kBulge
);
}
// Otherwise, it's a line, so set the bulge
// to zero
else
{
pline.SetBulgeAt(
pline.NumberOfVertices-1,
0
);
}
return true;
}
public Entity GetEntity()
{
return Entity;
}
public bool IsArcSegment()
{
return m_isArcSeg;
}
public bool IsUndoing()
{
return m_isUndoing;
}
public void AddDummyVertex()
{
// Create a new dummy vertex...
// can have any initial value
Polyline pline = Entity as Polyline;
pline.AddVertexAt(
pline.NumberOfVertices,
new Point2d(0,0),
0,0,0
);
}
public void RemoveDummyVertex()
{
Polyline pline = Entity as Polyline;
// Let's first remove our dummy vertex
if (pline.NumberOfVertices > 0)
{
pline.RemoveVertexAt(pline.NumberOfVertices - 1);
}
// And then check the type of the last segment
if (pline.NumberOfVertices >= 2)
{
double blg =
pline.GetBulgeAt(pline.NumberOfVertices - 2);
m_isArcSeg = (blg != 0);
}
}
public void AdjustSegmentType(bool isArc)
{
// Change the bulge of the previous segment,
// if necessary
double bulge = 0.0;
if (isArc)
bulge = kBulge;
Polyline pline = Entity as Polyline;
if (pline.NumberOfVertices >= 2)
pline.SetBulgeAt(pline.NumberOfVertices - 2, bulge);
}
}
[CommandMethod("MYPOLY")]
public void MyPolyJig()
{
Document doc =
Application.DocumentManager.MdiActiveDocument;
Editor ed = doc.Editor;
// Get the current UCS, to pass to the Jig
Matrix3d ucs =
ed.CurrentUserCoordinateSystem;
// Create our Jig object
PlineJig jig = new PlineJig(ucs);
// Loop to set the vertices directly on the polyline
bool bPoint = false;
bool bKeyword = false;
bool bComplete = false;
do
{
PromptResult res = ed.Drag(jig);
bPoint =
(res.Status == PromptStatus.OK);
// A new point was added
if (bPoint)
jig.AddDummyVertex();
bKeyword =
(res.Status == PromptStatus.Keyword);
if (bKeyword)
{
if (jig.IsUndoing())
{
jig.RemoveDummyVertex();
}
else
{
jig.AdjustSegmentType(jig.IsArcSegment());
}
}
// Null input terminates the command
bComplete =
(res.Status == PromptStatus.None);
if (bComplete)
// Let's clean-up the polyline before adding it
jig.RemoveDummyVertex();
} while ((bPoint || bKeyword) && !bComplete);
// If the jig completed successfully,
// add the polyline
if (bComplete)
{
Polyline pline = jig.GetEntity() as Polyline;
if (pline.NumberOfVertices > 1)
{
// Append entity
Database db = doc.Database;
Transaction tr =
db.TransactionManager.StartTransaction();
using (tr)
{
BlockTable bt =
(BlockTable)tr.GetObject(
db.BlockTableId,
OpenMode.ForRead,
false
);
BlockTableRecord btr =
(BlockTableRecord)tr.GetObject(
bt[BlockTableRecord.ModelSpace],
OpenMode.ForWrite,
false
);
btr.AppendEntity(pline);
tr.AddNewlyCreatedDBObject(pline, true);
tr.Commit();
}
}
}
}
}
}

悠悠筱荷 · 发表于 2014-3-10 13:27:01

顶起来…………

严英华 · 发表于 2014-3-11 11:06:12

谢谢BIM大神…

龙龙..! · 发表于 2014-3-11 11:09:24

顶起来…………

JHXT杰西卡 · 发表于 2014-3-11 11:18:14

楼主辛苦……

dglei88 · 发表于 2014-3-14 11:19:33

顶!!!!!!!!!!

audigy · 发表于 2014-3-14 11:23:46

(*^__^*) 嘻嘻……

影馨 · 发表于 2014-3-14 11:28:50

顶！！！！！！！！！！！！！！！！！！！！！！！！！

拉登 · 发表于 2014-3-14 11:34:26

路过！！！帮顶……

xy666 · 发表于 2014-5-22 15:34:50

顶起来…………

帐号		自动登录	找回密码
密码			注册

[用户交互] 关键字设置

社区QQ达人